Dynalink ALE800 Guia de Configuração descarregar pdf (Página 7)

Troubleshooting tips and tools

5.1 Meaning of the modem indicator lights

PW: Power is being provided by your system to the modem.

LK (off): No ADSL link.

LK (flashing): Connection to local telephone exchange is being established.

LK (steady): Connection is made. Now ready to go on line.

5.2 Diagnostics utility

Upon successful installation, a DSL Status utility is also installed. This utility is

launched automatically with Windows, indicating the link status. The icon consists

of two arrows. The up arrow indicates data are being transmitted. Likewise, the

down arrow indicates data are being received:

Up & down arrows flashing alternatively: training (link establishing) is in progress.

Green arrows: Modem is transmitting and receiving data.

Red arrows: Modem is disconnected or an error occurs.

5.3 Cannot connect to Internet or cannot browse

Check the link status using the method described in Section 4. The link will establish

as long as there is signal. If no link is possible in several minutes the modem is

not receiving any ADSL signal from the local telephone exchange. Check that:

ADSL service has been enabled.

Modem is connected to the correct jackpoint.

Modem is connected directly to jackpoint, not after a filter or other device.

If the link is active but you still cannot connect, make sure your Internet account

user name and password have been entered in the exact format as specified.

Check also that all the essential parameters have been entered correctly. See

the next paragraph.

5.4 Changing the modem settings after installation

All the essential parameters as shown in Section 3 must be entered correctly.

Should you require to correct any settings without re-installing modem, go to

Start - Programs - Dynalink ADSL Modem - Configure. Re-enter the essential

parameters as listed in Section 3.

5.5 Uninstall modem driver

To ensure a clean uninstall, the modem must be attached to computer during

the process. Go to Start - Programs - Dynalink ADSL Modem - Uninstall and

run the uninstaller.

1 2 3 4 5 6 7 8

Sem comentários

Dynalink ALE800 Guia de Configuração Página 7