Dynalink WLG25USB Guia de Configuração descarregar pdf (Página 9)

WLAN USB Adaptor Quick Set-up Guide

If the adaptor is already installed, click Start > Run. Enter cmd and click OK.

In the DOS window, type in ipconfig /all. Under Ethernet Adapter Wireless

Network Connection, the MAC address is displayed as physical address in

a group of 6 double digits.

For Windows 98 or ME, click Start > Run, type in winipcfg and then OK. Select

the wireless adaptor. Read off the MAC address from Adapter Address.

3. Poor Link Quality

If the link quality is poor, it may be due to one of these reasons:

Radio interference.

Distance between adaptor and access point/wireless station is too far.

Adjust the position of the antenna on the adaptor.

There are usually 13 channels available to use. In infrastructure mode, the access

point selects the channel used for communications. In adhoc mode, the users

can agree on picking a different channel to avoid radio interference.

4. How to avoid radio interference

Other wireless devices and appliances on site may share the same 2.4 GHz band.

If undesirable effects are observed, try using a different channel if possible. Also

try the following:

Move the computer to a different location or orientation. If adaptor is USB,

move the adaptor instead of computer.

If the radio interference source is known, increase the separation between

the computer and the device causing the interference.

Do not share the same AC power socket between the computer and the device

generating the interference.

Stay away from microwave sources (including microwave oven) and large

metal objects.

1 2 3 4 5 6 7 8 9 10

Sem comentários

Dynalink WLG25USB Guia de Configuração Página 9